Downloading Data from the GX-2003 • 27
8. You can view, print, export, or delete downloaded data by
entering the Data or Last Calibration windows. These
windows are accessed by clicking the Data or Last
Calibration buttons along the right side of the Download
window. See “Viewing, Printing, Exporting, and Deleting
Data” on page 28 or “Last Calibration Button” on page 17.
9. After downloading data from an instrument, you can delete
all the data in the GX-2003 by clicking the “Clear Data”
button if desired. This will not delete instrument parameters
such as serial number, alarm settings, or autocalibration
settings.
WARNING: If you click the Clear Data button, all data is
erased in the GX-2003, but not in your
computer’s memory. So it’s advisable that you
download the data from the GX-2003 first before
clearing the data.
To avoid overwriting data in the GX-2003 before it can be
downloaded, note the amount of log time still available in the
GX-2003 when beginning a data logging session and what
the overwrite setting is in the GX-2003. See the GX-2003
Operator’s Manual.
To Next Page
Loading...
