Changing Data Logging Parameters • 56
5. To change the serial number, station ID, or user ID stored in
the GX-2003, click the field you wish to change (e.g., user
ID), use the backspace key to remove the current entry, then
type the new information.
6. To change the datalogging interval time, click on the down
arrow in the Interval Trend Time field and select the desired
interval time in seconds.
7. To change the channel parameters, click the field you wish to
change (e.g. H2S AutoCal.), use the Back Space key to
remove the current entry, then type the new information.
8. After you have finished entering new parameters, you must
upload this information to the GX-2003 by clicking the
Update button, then confirming that you want to update the
information by clicking the Yes button when the Update
window appears.
9. To update the GX-2003’s date and time to match the
computer’s, click the Date/Time Set button and then click the
Yes button when the Update window appears.
10.If you wish to use other functions in the software, click the
appropriate control button along the right side of the program
window.
11.If you wish to exit the software, click the Download button to
return to the Download window. Turn off the GX-2003 by
using the POWER/ENTER button on the GX-2003 or by
clicking the Power Off button and confirming that you want
to turn off the GX-2003 when the Power Off window appears.
Then click the Exit button to exit the software.
To Next Page
Loading...
Need help?
General
