Commissioning and Maintenance
62 © robatherm
Note
Treated water must be removed from galvanized parts immediately. White rust formation!
Shut Down
Humidifier sump, siphon and pump (with drain plug or valve) should be completely
drained.
Remove drop eliminator and straightener profiles for cleaning.
Clean spray humidifier completely with commercially available cleaning agents, if
necessary descalers (follow manufacturer’s instructions).
Dry inner surfaces by fan slow down.
Do not refill humidifier sump until humidification is needed.
Pos: 68.19 /Layout/Sei tenumbruch @ 0\mod_125 6628615637_0.doc @ 2284 @
To Next Page
Loading...