Robustel GoRugged R2000 - Page 114

Robustel GoRugged R2000 User Guide
RT_UG_R2000_v.1.2.0 15.12.2015 113 /120
Confidential
# set link_manager primary_link (space+?)
Enum Primary Link (wwan1/wwan2/wan/WiFi)
# set link_manager primary_link wwan1 //select “wwan1” as primary_link
OK //setting succeed
# set link_manager link 1
type Type
desc Description
connection_type Connection Type
wwan WWAN Settings
static_addr Static Address Settings
pppoe PPPoE Settings
ping Ping Settings
mtu MTU
dns1_overrided Overrided Primary DNS
dns2_overrided Overrided Secondary DNS
# set link_manager link 1 type wwan1
OK
# set link_manager link 1 wwan
auto_apn Automatic APN Selection
apn APN
username Username
password Password
dialup_number Dialup Number
auth_type Authentication Type
aggressive_reset Aggressive Reset
switch_by_data_allowance Switch SIM By Data Allowance
data_allowance Data Allowance
billing_day Billing Day
# set link_manager link 1 wwan switch_by_data_allowance true
OK
#
# set link_manager link 1 wwan data_allowance 100 //open cellular switch_by_data_traffic
OK //setting succeed
# set link_manager link 1 wwan billing_day 1 //setting specifies the day of month for billing
OK // setting succeed
…
# config save_and_apply
OK // save and apply current configuration, make you configuration effect
Example 4: Set LAN IP address
# show lan all
network {
id = 1