Robustel GoRugged R2000 User Manual

Robustel GoRugged R2000 User Guide
RT_UG_R2000_v.1.2.0 15.12.2015 114 /120
Confidential
interface = lan0
ip = 192.168.0.1
netmask = 255.255.255.0
mtu = 1500
dhcp {
enable = true
mode = server
relay_server = ""
pool_start = 192.168.0.2
pool_end = 192.168.0.100
netmask = 255.255.255.0
gateway = ""
primary_dns = ""
secondary_dns = ""
wins_server = ""
lease_time = 120
expert_options = ""
debug_enable = false
}
}
multi_ip {
id = 1
interface = lan0
ip = 172.16.99.11
netmask = 255.255.0.0
}
#
# set lan
network Network Settings
multi_ip Multiple IP Address Settings
vlan VLAN
# set lan network 1(space+?)
interface Interface
ip IP Address
netmask Netmask
mtu MTU
dhcp DHCP Settings
# set lan network 1 interface lan0
OK
# set lan network 1 ip 172.16.99.22 //set IP address for lan
OK //setting succeed
# set lan network 1 netmask 255.255.0.0
OK
#

Robustel GoRugged R2000 Specifications

General

Model	GoRugged R2000
Category	Network Router
Ethernet Ports	2 x 10/100 Mbps
SIM Slots	2
Power Supply	9-36 VDC
USB Port	1 x USB 2.0
Cellular Connectivity	4G LTE, 3G
VPN Support	IPsec, OpenVPN, GRE
Operating Temperature	-40°C to +75°C
WiFi	802.11 b/g/n
Serial Interface	RS232/RS485
GPS	Yes
Firewall	SPI Firewall
Digital Input/Output	2 x DI