Robustel GoRugged R2000 User Manual

Robustel GoRugged R2000 User Guide
RT_UG_R2000_v.1.2.0 15.12.2015 35 /120
Confidential
Static Address Setting
Item
Description
Default
Primary DNS
Enter the primary DNS server IP address.
Null
Secondary DNS
Enter the Secondary DNS server IP address.
Null
R2000 router cannot support PPPoE WLAN Connection Type.
Ping Detection Setting/Advance Setting
Item
Description
Default
Enable
To enable “ping detection”. It was a keepalive policy of R2000 router.
OFF
Primary Server
Router will ping this primary address/domain name to check that if the
current connectivity is active.
8.8.8.8
Secondary Server
Router will ping this secondary address/domain name to check that if the
current connectivity is active.
Null
Interval
Set the ping interval.
300
Retry Interval
Set the ping retry interval.
5
Tmeout
Set the ping timeout.
3
Max Ping Tries
Switch to another link or take emergency action if max continuous ping
tries reached.
3
MTU
Maximum Transmission Unit. It is the identifier of the maximum size of
packet, which is possible to transfer in a given environment.
1500
Overrided Primary DNS
Overrided DNS will override the automatically obtained DNS.
Null
Overrided Secondary
DNS
Overrided DNS will override the automatically obtained DNS.
Null

Robustel GoRugged R2000 Specifications

General

Model	GoRugged R2000
Category	Network Router
Ethernet Ports	2 x 10/100 Mbps
SIM Slots	2
Power Supply	9-36 VDC
USB Port	1 x USB 2.0
Cellular Connectivity	4G LTE, 3G
VPN Support	IPsec, OpenVPN, GRE
Operating Temperature	-40°C to +75°C
WiFi	802.11 b/g/n
Serial Interface	RS232/RS485
GPS	Yes
Firewall	SPI Firewall
Digital Input/Output	2 x DI