Robustel GoRugged R2000 User Manual

Robustel GoRugged R2000 User Guide
RT_UG_R2000_v.1.2.0 15.12.2015 70 /120
Confidential
Advanced Settings
Item
Description
Default
Enable HMAC Firewall
Add an additional layer of HMAC authentication on top of the TLS
control channel to protect against DoS attacks.
OFF
Enable PKCS#12
Enable the PKCS#12 certificate. It is an exchange of digital certificate
encryption standard, used to describe personal identity information.
OFF
Enable nsCertType
Require that peer certificate was signed with an explicit nsCertType
designation of "server".
OFF
Expert Options
You can enter some other options of OpenVPN in this field. Each
expression can be separated by a ‘;’.
Null
Status
x509
x509
Item
Description
Default
Tunnel Name
Select the name of the Tunnel1 to Tunnel3. Because the maximum
number of the tunnel is three.
Tunnel 1
Certificate Files
Choose the correct file to import the certificate into the router.
The correct file format as followings:
@ca.crt
@remote.crt
@local.crt
@private.key
@crl.pem
Null
Index
Show the index of the certificate file.
Null
Filename
Show the name of the certificate file.
Null
File Size
Show the size of the certificate file.
Null
Last Modification
Show the timestamp of that the last time to modify the certificate file.
Null

Robustel GoRugged R2000 Specifications

General

Model	GoRugged R2000
Category	Network Router
Ethernet Ports	2 x 10/100 Mbps
SIM Slots	2
Power Supply	9-36 VDC
USB Port	1 x USB 2.0
Cellular Connectivity	4G LTE, 3G
VPN Support	IPsec, OpenVPN, GRE
Operating Temperature	-40°C to +75°C
WiFi	802.11 b/g/n
Serial Interface	RS232/RS485
GPS	Yes
Firewall	SPI Firewall
Digital Input/Output	2 x DI