Robustel R2000 - Page 54

Robustel R2000 User Guide
RT_UG_R2000_v.3.0.0 July 24, 2017 54 / 124
Confidential
General Settings @ Access Point
Item
Description
Default
WEP Key
Enter the WEP key. The key length should be 10 or 26
hexadecimal digits depending on which WEP key is used, 64 digits
or 128 digits.
Null
Advanced Settings
Item
Description
Default
Max Associated Stations
Set the max number of clients allowed to access the router’s AP.
64
Beacon Interval
Set the interval of time in which the router AP broadcasts a beacon
which is used for wireless network authentication.
100
DTIM Period
Set the delivery traffic indication message period and the router AP
will multicast the data according to this period.
2
RTS Threshold
Set the “request to send” threshold. When the threshold set as
2347, the router AP will not send detection signal before sending
data. And when the threshold set as 0, the router AP will send
detection signal before sending data.
2347
Fragmentation Threshold
Set the fragmentation threshold of a WiFi AP. It is recommended that
you use the default value 2346.
2346
Transmit Rate
Specify the transmit rate or let it default to “Auto”.
Auto
11N Transmit Rate
Specify the transmit rate under the IEEE 802.11n mode or let is
default to “Auto”.
Auto
Transmit Power
Select from “Max”, “High”, “Medium” or “Low”.
Max
Channel Width
Select from “Auto”, “20MHz” or “40MHz”.
Auto