188 Rockwell Automation Publication 2198-UM005C-EN-P - February 2022
Appendix B Upgrade Kinetix 5300 Drive Firmware
c. Click OK.
3. On the Flash Devices tab,
verify that the check box to
the left of the device is
selected.
4. From the Flash To pull-down menu, choose one of these methods for
choosing the desired firmware revision:
• Latest from Download Center
• Latest on Computer
In this example, the Latest on Computer method is chosen.
5. Click Next.
6. If a warning dialog box appears, read the warning, complete any
recommendations, and click Close.
If you have already downloaded the firmware, choose Latest on Computer
and select the desired revision. Otherwise, choose Latest from Download
Center and select the desired revision.
To Next Page
Loading...
Need help?
General
