1-18
Document: 553632
(ICSTT-RM448_EN_P) Issue: 08:
System Build Manual (AADvance Controller)
T9310 Expansion Cable Assembly
T9310 Expansion Cable AssemblyT9310 Expansion Cable Assembly
T9310 Expansion Cable Assembly
The T9310 expansion cable assembly connects a T9300 I/O base unit to another I/O
base unit or to the T9100 processor base unit. The assembly consists of a cable,
terminated by multi-way plugs, and a pair of adaptors.
One end has a cable socket assembly and the other end a cable plug assembly that
connects to the right-hand bus connector of an I/O base unit or to IO Bus2 (the left
hand connector) of a processor base unit. The socket connects to the left-hand bus
connector of an I/O base unit.
The expansion cable offers the following features:
Two meter cable length
Secured with retaining screws and screw cap screws
Connects all command and response signals and system power
Screened to reduce resonance emissions
To Next Page
Loading...
