EVISION - HD101 & HD102 www.roevisual.com
V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved.
33 / 41
6.17.6 Color Reproduction
After the setup for original color and brightness, the Color Reproduction function will allow the selection
of different color space modules, like sRGB, NTSC, PAL, etc., depending on the original color gamut space
triangle.
Manual input of Adjustment Coefficients of colors is available.
Figure 6-33. Color Reproduction
7 Firmware Upgrade for HD102 Processor & Panels
7.1 HD102 processor firmware upgrade
7.1.1 Connect PC with the HD102 processor using a USB cable and power on the HD102 processor.
7.1.2 Open LEDUpgrade software.
7.1.3 Select Send Mode -> Sender Mode.
Figure 7-1. LEDUpgrade - Sender Mode
7.1.4 Select the Sender tab.
Figure 7-2. Sender tab of LEDUpgrade
Read Scr een Infor mati on
Coefficient
1
Sending Card Offset Setting
-5%
-2% -1% +1% +2% +5%
1 Offset X Y
Scr een Dis pl ay
Red
Bri ghtnes s Adj ust
Bri ghtnes s
Module Si ze (px)
11%
Scal ing 100%
Gr adual Adj ustment
Height
64Width 64
Show Module Edge
Enable Edge Calibrati on
Select Recei ving Card
Reset Edge Data
Save
Hotkey Setting
Expor t
Import
200100 300 400 500 600 700 800 900 1000
1100 1200 1300
100 200 300 400
White
BlueGr een
Read Back All
Set Or iginal Color and Br i ghtness
Enable Gamut Adj us t
Disable Gamut Adj ust
Reset Adj us t Coef
Color Repr oducti on
Batches Matchi ng
Fi ne Adjustment
Select Same Batch
Col or Repr oduct ion
Adjustment Coef
Rr
0 9929.
Gr
0 0001.
Br
0 0000.
Rg
0 0063.
Gg
0 9679.
Bg
0 0000.
Rb
0 0098.
Gb
0 0001.
Bb
0 9767.
SaveCalculation Coef Read
Enable Gamut Adjust
Original R edRed 0.0000
X
0.00 00
Y
Green
0.00 00
X
0.00 00
Y
Blue
0.00 00
X
0.00 00
Y
Whit e
0.00 00
X
0.00 00
Y
Or iginal Green
Original B lue
Or iginal W hite
SRGB/Rec. 709 AdobeRGB PAL
NTSC Rec. 601
Rec. 2020
DCIP3 Custom
Adjust Target Original Value
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
(0.188, 0.711)
(0.687, 0.293)
( 0.1 37 , 0.051 )
To Next Page
Loading...