DIAGnostic Subsystem FSE
1065.6016.12 6.90 E-16
:DIAGnostic:INFO:CCOunt:ATTenuation<1 | 2 | 3>?
This command queries the cycle counters of the attenuators. The suffix selects the attenuator:
1: Basic instrument 2: Tracking Generator 3: FSE-B13
The result is output as a list of values separated by a ’,’. The list starts with the date.
Example: ":DIAG:INFO:CCO:ATT?"
Features: *RST value: --
SCPI: device-specific
Modes: A, VA, MS, BTS
This command is a query and has therefore no *RST value assigned.
To Next Page
Loading...
