Rohde & Schwarz FSEA20 - LINES Key Group

FSE Command Assignment - Signal Analysis
1065.6016.12 6.267 E-16
MKR->
PEAK
:CALCulate<1|2>:MARKer<1...4>:MAXimum[:PEAK]
:CALCulate<1|2>:DELTamarker<1...4>:MAXimum[:PEAK]
MKR->
CENTER
:CALCulate<1|2>:MARKer<1...4>:FUNCtion:CENTer
MKR->
REF LEVEL
:CALCulate<1|2>:MARKer<1...4>:FUNCtion:REFerence
MKR->
CF STEPSIZE
:CALCulate<1|2>:MARKer<1...4>:FUNCtion:CSTep
MKR->
START
:CALCulate<1|2>:MARKer<1...4>:FUNCtion:STARt
MKR->
STOP
:CALCulate<1|2>:MARKer<1...4>:FUNCtion:STOP
MKR->
TRACE
:CALCulate<1|2>:MARKer<1...4>:TRACe <num_value>
:CALCulate<1|2>:DELTamarker<1...4>:TRACe <num_value>
LINES Key Group
D LINES
DISPLAY
LINE 1/2
:CALCulate<1|2>:DLINe<1|2>:STATe ON | OFF;
:CALCulate<1|2>:DLINe<1|2> <num_value>
THRESHOLD
LINE
:CALCulate<1|2>:THReshold ON | OFF;
:CALCulate<1|2>:THReshold <num_value>
REFERENCE
LINE
:CALCulate<1|2>:RLINe:STATe ON | OFF;
:CALCulate<1|2>:RLINe <num_value>
FREQUENCY
LINE 1/2
or
:CALCulate<1|2>:FLINe<1|2>:STATe ON | OFF;
:CALCulate<1|2>:FLINe<1|2> <num_value>
TIME
LINE 1/2
:CALCulate<1|2>:TLINe<1|2>:STATe ON | OFF;
:CALCulate<1|2>:TLINe<1|2> <num_value>
BASELINE
CLIPPING
:CALCulate<1|2>:CTHReshold:STATe ON | OFF
:CALCulate<1|2>:CTHReshold <num_value>
LIMITS
SELECT
LIMIT LINE
:CALCulate<1|2>:LIMit<1...8>:NAME <string>;
:CALCulate<1|2>:LIMit<1...8>:STATe ON | OFF
NEW
LIMIT LINE
see EDIT LIMIT LINE
NAME
:CALCulate<1|2>:LIMit<1...8>:NAME <string>
VALUES
no corresponding IEC/IEEE-bus command