Rohde & Schwarz FSEA20 - Sense:tv Subsystem

FSE SENSe Subsystem
1065.6016.12 6.211 E-16
SENSe:TV Subsystem
This subsystem controls the optional TV-demodulator (only in conjunction with option TV-Demodulator,
FSE-B3).
COMMAND PARAMETERS UNIT COMMENT
[SENSe<1|2>]
:TV
[:STATe]
:PSOFfset
<Boolean>
<numeric_value>
--
HZ
Option TV-Demodulator
:[SENSe<1|2>:]TV[:STATe] ON | OFF
This command switches the optional TV-demodulator on or off.
Example: ":TV ON"
Features: *RST value: OFF
SCPI: device-specific
Mode: A-Z
This command is available only in conjunction with option TV-Demodulator, FSE-B3.
:[SENSe<1|2>:]TV:PSOFfset 0 to 6.5 MHz
This command defines the frequency offset between video and audio carrier of the measured signal.
Example: ":TV:PSOF 1 MHz"
Features: *RST value: 5 MHz
SCPI: device-specific
Mode: A-Z
This command is available only in conjunction with option TV-Demodulator, FSE-B3.