Rohde & Schwarz FSEA20 - Sense:mixer - Subsystem

FSE SENSe Subsystem
1065.6016.12 6.197 E-16
SENSe:MIXer - Subsystem
The SENSe:MIXer subsystem controls the settings of the external mixer. It is only active in Analyzer
mode (INSTrument SANalyzer).
This subsystem is available only if the instrument is equipped with the external mixer output (option
FSE-B21)
The suffix in SENSe<1|2> is not significant in this subsystem.
COMMAND PARAMETERS UNIT COMMENT
:[SENSe<1|2>:]
:MIXer
[:STATe]
:BLOCk
:PORTs
:SIGNal
:THReshold
:HARMonic
:TYPE
:BAND
:LOSS
[:LOW]
:HIGH
:TABLe
:BIAS
<Boolean>
<Boolean>
2 | 3
OFF | ON | AUTO
<numeric_value>
<numeric_value>
ODD | EVEN | EODD
A|Q|U|V|E|W|F|D|G|Y|J
<numeric_value>
<numeric_value>
<file_name>
<numeric_value>
--
--
DB
DB
A
Only query in band lock on
Not in band lock off
Not in band lock off
Not in band lock off
:[SENSe<1|2>:]MIXer[:STATe] ON | OFF
This command activates or shuts off the external mixer.
Example: ":MIX ON"
Features: *RST value: OFF
SCPI: device-specific
Mode: A
This command is available only in conjunction with option FSE-B21, External Mixer Output.
:[SENSe<1|2>:]MIXer:BLOCk ON | OFF
This command activates the BAND LOCK ON or BAND LOCK OFF mode.
Example: ":MIX:BLOC ON"
Features: *RST value: OFF
SCPI: device-specific
Mode: A
This command is available only if the external mixer (option FSE-B21) is switched on.