SENSe Subsystem FSE
1065.6016.12 6.198 E-16
:[SENSe<1|2>:]MIXer:PORTs 2 | 3
This command activates the 2- or 3-port mixer. In the BAND LOCK ON mode, the command refers
to the active band selected with SENSe:MIXer:HARMonic:BAND .
Example: ":MIX:PORT 3"
Features: *RST value: 2
SCPI: device-specific
Mode: A
This command is available only if the external mixer (option FSE-B21) is switched on.
:[SENSe<1|2>:]MIXer:SIGNal ON | OFF | AUTO
This command activates the Signal ID or Auto ID mode.
Example: ":MIX:SIGN ON"
Features: *RST value: OFF
SCPI: device-specific
Mode: A
This command is available only if the external mixer (option FSE-B21) is switched on.
:[SENSe<1|2>:]MIXer:THReshold 0.1 to 100 dB
This command sets the level threshold for auto ID.
Example: ":MIX:THR 20"
Features: *RST value: 10
SCPI: device-specific
Mode:A
The command is available only if the external mixer (option FSE-B21) is switched on.
:[SENSe<1|2>:]MIXer:HARMonic 1 to 62
With BAND LOCK OFF, this command sets the nth harmonic. The command may be a query with
BAND LOCK ON.
Example: ":MIX:HARM 5"
Features: *RST value: 2
SCPI: conforming
Mode: A
The command is available only if the external mixer (option FSE-B21) is switched on.
To Next Page
Loading...
