Rohde & Schwarz FSEA20 - Source Subsystem

SOURce Subsystem FSE
1065.6016.12 6.212 E-16
SOURce Subsystem
The SOURce subsystem controls the output signals of the analyzer when the option Tracking Generator
is installed (FSE-B8 to FSE-B11). In the split screen mode, a distinction is made between SOURce1
(screen A) and SOURce2 (screen B).
COMMAND PARAMETERS UNIT COMMENT
SOURce<1|2>
:AM
:STATe
:DM
:STATe
:FM
:STATe
:FREQuency
:OFFSet
:POWer
:ALC
:SOURce
[:LEVel]
[:IMMediate]
[:AMPLitude]
:OFFSet
<Boolean>
<Boolean>
<Boolean>
<numeric_value>
INTernal | EXTernal
<numeric_value>
<numeric_value>
HZ
DBM
DB
Option Mitlaufgenerator
:SOURce<1|2>:AM:STATe ON | OFF
This command switches on or off the external amplitude modulation of the tracking generator.
Example: ":SOUR:AM:STAT ON "
Features: *RST-value: OFF
SCPI: conforming
Modes: A, VA
External ALC and external I/Q-modulation is switched off, if active. This command is only valid in
conjunction with option Tracking Generator.
:SOURce<1|2>:DM:STATe ON | OFF
This command switches on or off the external delta modulation of the tracking generator.
Example: ":SOUR:DM:STAT ON "
Features: *RST- value: OFF
SCPI: conforming
Modes: A, VA
External AM, external ALC, external FM and external frequency offset are switched off, if active. This
command is only valid in conjunction with option Tracking Generator.