EasyManua.ls Logo

Rohde & Schwarz FSEA20 - Page 270

Rohde & Schwarz FSEA20
438 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FSE SOURce Subsystem
1065.6016.12 6.213 E-16
:SOURce<1|2>:FM:STATe ON | OFF
This command switches on or off the external frequency modulation of the tracking generator.
Example: ":SOUR:FM:STAT ON "
Features: *RST-value: OFF
SCPI: conforming
Modes: A, VA
External AM, external I/Q-modulation and frequency offset are switched off, if active. This command
is only valid in conjunction with option Tracking Generator.
:SOURce<1|2>:FREQuency:OFFSet -200MHz to 200MHz
This command defines a frequency offset of the tracking generators to the current instrument
frequency.
Example: ":SOUR:FREQ:OFFS "
Features: *RST-value: 0 Hz
SCPI: conforming
Modes: A, VA
External delta modulation is switched off, if active. This command is only valid in conjunction with
option Tracking Generator.
:SOURce<1|2>:POWer:ALC:SOURce INTernal | EXTernal
This command switches on or off the external level control (ALC).
Example: ":SOUR:POW:ALC:SOUR INT "
Features: *RST- value: INT
SCPI: conforming
Modes: A, VA
External AM and external delta modulation are switched off, if active. This command is only valid in
conjunction with option Tracking Generator.
:SOURce<1|2>:POWer[:LEVel][:IMMediate][:AMPLitude] -20dBm to 0dBm /
Option FSE-B12: -90dBm to 0dBm
This command defines the level of the tracking generator.
Example: ":SOUR:POW -20dBm"
Features: *RST- value: -20 dBm
SCPI: conforming
Modes: A, VA
This command is only valid in conjunction with option Tracking Generator.
:SOURce<1|2>:POWer[:LEVel][:IMMediate]:OFFSet -200dB to +200dB
This command defines a level offset for the tracking generator.
Example: ":SOUR:POW:OFFS -10dB"
Features: *RST- value: 0dB
SCPI: conforming
Modes: A, VA
This command is only valid in conjunction with option Tracking Generator.

Table of Contents

Related product manuals