Rohde & Schwarz FSEA20 - Sense:correction-Subsystem

FSE SENSe Subsystem
1065.6016.12 6.171 E-16
SENSe:CORRection-Subsystem
The SENSe:CORRection-subsystem controls the correction of measured results by means of
frequency-dependent correction factors (e. g. for antenna or cable attenuation).
It also controls calibration and normalization during operation with the option Tracking Generator .
COMMAND PARAMETERS UNIT COMMENT
[SENSe<1|2>]
:CORRection
:METHod
:COLLect
[:ACQuire]
[:STATe]
:RECall
TRANsmission | REFLexion
THRough | OPEN
<Boolean>
option Tracking Generator
no query
no query
:TRANsducer
:CATalog?
:ACTive?
:SELect
:UNIT
:SCALing
:COMMent
:DATA
[:STATe]
:DELete
:TSET
:CATalog?
:ACTive?
:SELect
:UNIT
:BREak
:COMMent
:RANGe<1 to 10>
[:STATe]
:DELete
<name>
<string>
LINear | LOGarithmic
<string>
<freq> , <level> ..
<Boolean>
--
<name>
<string>
<Boolean>
<string>
<freq> , <freq>, <name> ..
<Boolean>
--
HZ , --
--
HZ, HZ, --
--
query only
query only
no query
query only
query only
no query
:LOSS
:INPut
[:MAGNitude] <numeric_value> DB
option FSE-K11 or
FSE-K10
:RXGain
:INPut
[:MAGNitude] <numeric_value> DB
option FSE-K11 or
FSE-K10
:CVL
:CATalog?
:SELect
:MIXer
:SNUMber
:BAND
:TYPE
:PORTs
:BIAS
:COMMent
:DATA
:CLEar
<file_name>
<string>
<string>
A|Q|U|V|E|W|F|D|G|Y|J
ODD | EVEN | EODD
2 | 3
<numeric_value>
<string>
<freq> , <level> ..
--
A
HZ , DB
--
option external mixer output
query only
no query