Rohde & Schwarz FSEA20 - Status Questionable:lmargin Register

Status Reporting System FSE
1065.6016.12 5.28 E-16
STATus QUEStionable:LMARgin Register
This register comprises information about the observance of limit margins. It can be queried with
commands STATus:QUEStionable:LMARgin:CONDition? and "STATus:QUEStionable
:LMARgin[:EVENt]?.
Table 5-8 Meaning of bits in STATus:QUEStionable:LMARgin register
Bit No. Meaning
0
LMARgin 1 FAIL
This bit is set if limit margin 1 is violated.
1
LMARgin 2 FAIL
This bit is set if limit margin 2 is violated.
2
LMARgin 3 FAIL
This bit is set if limit margin 3 is violated.
3
LMARgin 4 FAIL
This bit is set if limit margin 4 is violated.
4
LMARgin 5 FAIL
This bit is set if limit margin 5 is violated.
5
LMARgin 6 FAIL
This bit is set if limit margin 1 is violated.
6
LMARgin 7 FAIL
This bit is set if limit margin 7 is violated.
7
LMARgin 8 FAIL
This bit is set if limit margin 8 is violated.
8 not used
9 not used
10 not used
11 not used
12 not used
13 not used
14 not used
15 This bit is always 0.