Rohde & Schwarz FSEA20 - CONFIGURATION Key Group - Analog Demodulation

Command Assignment - Vector Signal Analysis FSE
1065.6016.12 6.288 E-16
CONFIGURATION Key Group - Analog Demodulation
MODE
--
VECTOR
ANALYZER
--
ANALOG
DEMOD
::INSTrument<1|2>[:SELect] ADEMod
MODULATION
PARAMETER
--
HIGH PASS
AF FILTER
SENSe<1|2>:FILTer:HPASs[:STATe] ON | OFF
SENSe<1|2>:FILTer:HPASs:FREQuency <num_value>
LOW PASS
AF FILTER
SENSe<1|2>:FILTer[:LPASs][:STATe] ON | OFF
SENSe<1|2>:FILTer[:LPASs]:FREQuency <num_value>
WEIGHTING
AF FILTER
SENSe<1|2>:FILTer:CCITt[:STATe] ON | OFF
SENSe<1|2>:FILTer:CMESsage[:STATe] ON | OFF
AF COUPL’G
AC DC
SENSe<1|2>:ADEMod:AF:COUPling AC|DC
SQUELCH
ON OFF
SENSe<1|2>:ADEMod:SQUelch[:STATe] ON | OFF
SQUELCH
LEVEL
SENSe<1|2>:ADEMod:SQUelch:LEVel <num_value>
SIDE BAND
NORM INV
SENSe<1|2>:ADEMod:SBANd NORMal|INVerse
AM/FM
DEEMPH
SENSe<1|2>:FILTer:DEMPhasis:TCONstant <num_value>
PRE DISPL
ON OFF
SENSe<1|2>:FILTer:DEMPhasis:LINK DISPlay|AUDio
MEAS
RESULT
--
AM
SIGNAL
:CALCulate<1|2>:FEED ‘XTIM:AM’
FM
SIGNAL
:CALCulate<1|2>:FEED ‘XTIM:FM’
PM
SIGNAL
:CALCulate<1|2>:FEED ‘XTIM:PM’
MODULATION
SUMMARY
:CALCulate<1|2>:FEED ‘XTIM:AMSummary’
:CALCulate<1|2>:FEED ‘XTIM:FMSummary’
:CALCulate<1|2>:FEED ‘XTIM:PMSummary’
:CALCulate<1|2>:MARKer<1...4>:FUNCtion:ADEMod:AM[:RESult?]
PPEak | MPEak | MIDDle | RMS
:CALCulate<1|2>:MARKer<1...4>:FUNCtion:ADEMod:FM[:RESult?]
PPEak | MPEak | MIDDle | RMS | RDEV
:CALCulate<1|2>:MARKer<1...4>:FUNCtion:ADEMod:PM[:RESult?]
PPEak | MPEak | MIDDle | RMS
:CALCulate<1|2>:MARKer<1...4>:FUNCtion:ADEMod:AFRequency[:RESult?]
:CALCulate<1|2>:MARKer<1...4>:FUNCtion:ADEMod:FERRor [:RESult?]
:CALCulate<1|2>:MARKer<1...4>:FUNCtion:ADEMod:SINad:RESult?
:CALCulate<1|2>:MARKer<1...4>:FUNCtion:ADEMod:CARRier[:RESult?]
SUMMARY
SETTINGS
--