Rohde & Schwarz FSEA20 - Page 180

FSE HCOPy Subsystem
1065.6016.12 6.123 E-16
:HCOPy:ITEM:FFEed<1|2>:STATe ON | OFF
The command adds a form feed command to the hardcopy output of the screen.
Example: ":HCOP:ITEM:FFE2:STAT ON"
Features: *RST value: OFF
SCPI: conforming
Modes: A, VA, BTS, MS
:HCOPy:ITEM:LABel:TEXT <string>
This command defines the title of the screen with a maximum of 60 characters.
Example: ":HCOP:ITEM:LAB:TEXT ’My Title’"
Features: *RST value: OFF
SCPI: conforming
Modes: A, VA, BTS, MS
:HCOPy:ITEM:PFEed<1|2>:STATe ON | OFF
This command adds a paper feed command to the hardcopy output of the screen (ON).
Example: ":HCOP:ITEM:PFE2:STAT ON"
Features: *RST value: OFF
SCPI: device-specific
Modes: A, VA, BTS, MS
:HCOPy:ITEM:WINDow<1|2>:TABLe:STATe ON | OFF
This command selects the output of the currently displayed tables (ON).
Example: ":HCOP:ITEM:WIND:TABL:STAT ON"
Features: *RST value: OFF
SCPI: device-specific
Modes: A, VA, BTS, MS
The command :HCOPy:ITEM:WINDow<1|2>:TABLe:STATe OFF same as command
:HCOPy:ITEM:ALL enables the output of the whole screen.
:HCOPy:ITEM:WINDow<1|2>:TEXT <string>
This command defines the comment text for printout to trace 1 or 2 with a maximum of 100
characters.
Example: ":HCOP:ITEM:WIND2:TEXT ‘comment’"
Features: *RST value: -
SCPI: device-specific
Modes: A, VA, BTS, MS