FSE MMEMory Subsystem
1065.6016.12 6.135 E-16
:MMEMory:DELete <file_name>
This command deletes the files indicated.
Parameter: <file_name> ::= DOS file name
Example: ":MMEM:DEL ’TEST01.HCP’"
Features: *RST value: -
SCPI: conforming
Modes: A, VA, BTS, MS
The indication of the file name contains the path and, optionally, the drive. Indication of the path
corresponds to the DOS conventions. The file name includes indication of the path and may also
include the drive. The path name corresponds to the DOS conventions. This command is an event
which is why it is not assigned an *RST value and has no query.
:MMEMory:INITialize ’A:’
This command formats the disk in drive A.
Example: ":MMEM:INIT ’A:’"
Features: *RST value: -
SCPI: conforming
Modes: A, VA, BTS, MS
Formatting deletes all data stored on the floppy disk. This command is an event which is why it is not
assigned an *RST value and has no query.
:MMEMory:LOAD:STATe 1,<file_name>
This command loads instrument settings from files.
Parameter: <file_name> ::= DOS file name without extension
Example: ":MMEM:LOAD:STAT 1,’A:TEST’"
Features: *RST value: -
SCPI: conforming
Modes: A, VA, BTS, MS
The contents of the file is loaded and set as new instrument state. The file name includes indication
of the path and may also include the drive. The path name corresponds to the DOS conventions.
This command is an event which is why it is not assigned an *RST value and has no query.
To Next Page
Loading...
