FSE SENSe Subsystem
1065.6016.12 6.189 E-16
:[SENSe<1|2>:]DDEMod:PRESet GSM | EDGe | TETRa | DCS1800 | PCS1900 |PHS | PDCup |
PDCDown | APCO25CQPSK | APCO25C4FM | CDPD | DECT | CT2
| ERMes | MODacom | PWT | TFTS | F16 | F322 | F324 | F64|
FQCDma | F95Cdma | RQCDma | R95Cdma | FNADc | RNADc
This command selects an automatic setting of all modulation parameters according to a standard
transmission method.
Example: ":DDEM:PRES TETR"
Features: *RST value: GSM
SCPI: device-specific
Mode: VA-D
APCO25CQPSK APCO25 Continous Phase QPSK
APCO25C4FM APCO25Continous Phase 4FM
F16 FLEX 1600 - 2FSK
F322 FLEX 3200 - 2FSK,
F324 FLEX 3200 - 4FSK
F64 FLEX 6400 - 4FSK
FNADc Forward NADC
RNADc Reverse NADC
FQCDma or F95Cdma Forward CDMA acc. to IS95 Standard
RQCDma or R95Cdma Reverse CDMA acc. to IS95 Standard
:[SENSe<1|2>:]TCAPture:LENGth 1024 | 2048 | 4096 | 8192 | 16384
This command determines the number of sampling points that are written into the memory for each
measurement (memory size).
Example: "TCAP:LENG 1024"
Features: *RST value: 16384
SCPI: device-specific
Mode: VA-D
To Next Page
Loading...
