Rohde & Schwarz FSEA20 - Page 363

Command Assignment – GSM BTS Analyzer FSE
1065.6016.12 6.306 E-16
USER LIMIT
ON OFF
:CONFigure<1|2>[:BTS]:LIMit:STANdard ON | OFF
PAGE UP
--
PAGE DOWN
--
TRANSIENT
SPECTRUM
:CONFigure<1|2>:SPECtrum:SWITching[:IMMediate]
:CALCulate<1|2>:LIMit:SPECtrum:SWITching?
:CALCulate<1|2>:LIMit:SPECtrum:SWITching:FAILs?
SINGLE
FREQ SWEEP
:INITiate<1|2>:CONTinuous OFF; :INITiate<1|2>[:IMMediate]
CONTINUOUS
FREQ SWEEP
:INITiate<1|2>:CONTinuous ON; :INITiate<1|2>[:IMMediate]
START
LIST
:READ:SPECtrum:SWITching[:ALL]?
NO. OF
BURSTS
--
SET
MANUAL
:CONFigure<1|2>:SPECtrum:SWITching:COUNt <num_value>
SET TO
STANDARD
--
ARFCN /
FREQUENCY
see submenu SETTINGS
POWER
SETTINGS
see submenu SETTINGS
BTS SFH
ON OFF
:CONFigure<1|2>[:BTS]:CHANnel:SFH ON | OFF
MEAS
BANDWIDTH
:[SENSe<1|2>:]BANDwidth|BWIDth[:RESolution] DEF | 300kHz | 1MHz
TRIGGER
see submenu SETTINGS
EDIT
--
LIMIT LINE
FILTER
--
NEW LIMIT
LINE
see basic instrument
EDIT LIMIT
LINE
see basic instrument
COPY
LIMIT LINE
see basic instrument
DELETE
LIMIT LINE
see basic instrument
USER LIMIT
ON OFF
:CONFigure<1|2>[:BTS]:LIMit:STANdard ON | OFF
PAGE UP
--
PAGE DOWN
--