Rohde & Schwarz SMB100A - Replacing the Front Cover and the Front Unit (A300); Removing the Front Cover; Removing the Front Unit

Module Replacement R&S SMB
1407.0806.82 3.40 E-6
Replacing the Front Cover and the Front Unit (A300)
(See chapter 5, drawing 1406.6000.01).
Removing the Front Cover
(See chapter 5, drawing 1406.7507.01).
 Switch off the instrument and pull the mains plug.
 Dismounting the case (see page 3.39).
 Remove the front shock mounts.
 Pull off the front cover (1406.7520.00) towards the front.
Removing the Front Unit
(See chapter 5, drawings 1406.6000.01 and 1406.7507.01).
 Pull off the RF cables W212, W214 and W215.