Module Replacement R&S SMB
1407.0806.82 3.58 E-6
Replacing the Stereo/RDS-Coder Option R&S SMB-B5 (A400)
Removing the Stereo/RDS-Coder
Switch off the instrument and pull the mains plug.
Dismounting the case (see page 3.39).
Unscrew the two screws (A and B) fixing the option.
Lift up the option at one side and unlock the three RF-Cables (1407.3334.00)
from the RDS Stereo Coder.
Unlock the Stereo / RDS-Coder Cable W108 (1407.3328.00) from the RDS Stereo Coder.
To Next Page
Loading...
