Rohde & Schwarz SMB100A - Mounting the Front Cover; Mounting the Front Unit

R&S SMB Module Replacement
1407.0806.82 3.43 E-6
NOTICE
Store the RF cables at a safe place.
These cables are not components of the front unit.
When you mount the cables, ensure their correct position in the front unit.
Mounting the Front Unit
 Place the front unit and fix it with four countersunk screws (1148.2752.00).
 Reconnect the cables to the RF-board (W212, W 214 and W215) and to the basis board (W310, W 330
and the flex. switchboard cable).
Mounting the Front Cover
 Mount the new front cover.
 Place the shock mounts (front right and front left) and fix them with four screws (1096.4896.00).
 Place the knob of the encoder board.