R&S SMB Module Replacement
1407.0806.82 3.53 E-6
Remove the six nuts of the BNC-connectors.
Undo five screws (1148.2946.00) on the RF-board and remove the board.
NOTICE When ordering spare and replacement modules:
Spare modules of the RF board are always delivered with the ending number .13 for
.03 and the number .16 for .06 (see label).
Replacement modules of the RF board are always delivered with the ending number
A13 for .03 and the number A16 for .06 (see label).
Installing the RF-Board
Place the RF-Board into the R&S SMB-Frame in the right position and screw it with five screws
(1148.2946.00).
Screw the BNC-Connectors with the nuts and reconnect the RF-Cables (W212 (60 Ncm), W214,
W215) and the flex. cable W222.
To Next Page
Loading...
