Rohde & Schwarz SMB100A - Test Assembly for Output Impedance (VSWR); Test Assembly for Setting Time

R&S SMB Test Assemblies
1407.0806.82 1.5 E-5
Test Assembly for Output Impedance (VSWR)
Test equipment - VSWR bridge (Table 1-1, item 10),
- Second signal generator (Table 1-1, item 5)
- Spectrum analyzer (Table 1-1, item 18)
Test setup
6 dB
OUTPUT
INPUT
COUPLED
10 MHz Ref.
2
nd RF
Note: The INPUT of the directional coupler is directly screwed
to the DUT. The second signal generator is connected to
the line connector (OUTPUT), the analyzer to the
coupling output (COUPLED) of the directional coupler.
Test Assembly for Setting Time
Test equipment - Spectrum analyzer (Table 1-1, item 18)
- Pulse generator (Table 1-1, item 13)
Test setup
RF
RF
Analyzer
DUT
Pulse generator
10 MHz Ref.
Trigger pulse