Rohde & Schwarz SMB100A - Test Assemblies; Standard Test Assembly for Analog Modulations; Test Assembly for Pulse Modulation

R&S SMB Test Assemblies
1407.0806.82 1.3 E-5
Test Assemblies
Standard Test Assembly for Analog Modulations
Test equipment - RF analyzer (Table 1-1, item 18)
- Signal generator (Table 1-1, item 5)
Test setup The RF analyzer is used as a modulation analyzer. The signal
generator is used as modulation source in case of external
modulation.
RF
Analyzer
DUT
Signal
Generator
RF
10 MHz Ref.
10 MHz Ref.
LF
Test Assembly for Pulse Modulation
Test equipment - Oscilloscope (Table 1-1, item 3)
- Signal generator (Table 1-1, item 5)
- Mixer
Test setup The pulsed RF is mixed down to DC in phase and analyzed with an
oscilloscope.
RF
LO
6 dB 6 dB
RF
10 MHz Ref.
P
u
l
s
e