Roland FP-7 - Erasing Recorded Performances

103
Recording
You can erase recorded performances.
fig.Panel-DeleteSong.eps
1.
Hold down the [Display] button and press the [Rec] button.
A following screen appears.
fig.d-dEL.eps
If you decide not to erase your song, select “Cancel” then press the [Rec] button.
2.
Hold down the [Display] button and press the [+] button to select “OK.”
3.
Press the [Rec] button.
The recorded performance is erased.
After playing back a song, you can hold down one of the track buttons and press the
[Rec] button to erase the performance of only that track. If you erase the performance
from all tracks, the display will indicate “New Song.”
A performance you recorded will be erased automatically when you turn off the power.
Erasing Recorded Performances
FP-7-e.book 103 ページ ２００６年１２月１４日 木曜日 午前１０時５７分