119
Various Settings
Changing the Works of the Soft Pedal
(FC2)
When the instrument is turned on, this is set to function as a
soft pedal.
1.
Press the [Function] button.
2.
Press the [E.Piano] button.
The Pedal screen appears.
3.
While holding down the [Display] button, use
the [-] [+] buttons to select “FC2 Func.”
4.
Use the [-] [+] buttons to select the pedal
function.
Here’s how to select the effect that will be applied when you
press the [Multi Effects] button.
1.
Press the [Function] button.
2.
Press the [Multi Effects] button.
The Effects screen appears.
3.
While holding down the [Display] button, use
the [-] [+] buttons to select “Type.”
fig.d-EfxType.eps
4.
Use the [-] [+] buttons to select the effect type.
For details on the effect types and the settings for
each effect, refer to “Effects List” (p. 172).
Editing the Effect Settings in Detail
You can make detailed changes for each effect, such as
adjusting the effect depth.
5.
Select the item that you want to edit.
While holding down the [Display] button, use the [-] [+]
buttons to select the item that you want to edit (the
second and third lines from the top in the Effects screen).
The item in the second line from the top of the Effects
screen can be changed by holding down the [Multi
Effects] button and using the [-] [+] buttons, without your
having to open this screen.
6.
Use the [-] [+] buttons to edit the setting.
Effect Settings
Changing the Effect Type
FP-7-e.book 119 ページ ２００６年１２月１４日 木曜日 午前１０時５７分
To Next Page
Loading...
Need help?
General
