Roland FP-7 User Manual

49
Performing
You can apply a reverb effect to the notes you play on the keyboard. With the reverb
effect, you obtain a pleasant reverberation, making it sound as if you were performing
in a concert hall or similar space.
fig.Panel-Reverb.eps
1.
Press the [Reverb] button so it’s lit.
Try fingering the keyboard.
The reverb effect is applied to the entire tone.
Turning Off the Reverb Effect
1.
Press the [Reverb] button so its light is turned off.
You can select from ten levels of depth for the reverb effect.
1.
Hold down the [Reverb] button and press the [-] or [+] button.
The depth for the reverb effect appears in the display.
fig.d-2.eps
You cannot make separate reverb effect depth settings for each individual tone. The
same depth of reverb effect will apply to all sounds.
You cannot change reverb effect depth of Session Partner, Demo songs, and Internal
song.
Adding Reverberation to Sounds (Reverb Effect)
Changing the Depth of Reverb Effect
NOTE
NOTE
FP-7-e.book 49 ページ ２００６年１２月１４日 木曜日 午前１０時５７分

Roland FP-7 Specifications

General

Amplifier	13 W x 2
Keyboard	88 keys (PHA II keyboard with Escapement)
Touch Sensitivity	5 types, fixed touch
Sound Generator	128-note polyphony
Effects	Reverb, Chorus
Speakers	12 cm x 2
Connectivity	MIDI (In, Out), USB, Headphones, Line Out, Pedal
Recorder	3-track recorder
Display	128 x 64 dots
Included Accessories	Owner's Manual, Music Rest
Internal Memory	External storage: USB memory