Roland FP-7 - Changing the Tonal Quality (Equalizer)

57
Performing
You can use the equalizer to adjust the tonal quality.
This allows you to adjust the tonal character by boosting or decreasing the low-frequency
or high-frequency portions.
fig.Panel-Equalizer.eps
1.
Press the [Equalizer] button so it’s lit.
The equalizer will be turned on, and the tonal character will change.
Turning Off the Equalizer
1.
Press the [Equalizer] button so its light is turned off.
Changing the Tonal Quality (Equalizer)
FP-7-e.book 57 ページ ２００６年１２月１４日 木曜日 午前１０時５７分