Roland FP-7 User Manual

46
Performing
You can change the split point (the key at which the keyboard is divided).
The split point can be set to any value from B1 through B6.
This is set to “F 3” when the instrument is turned on.
This setting remains in effect until you turn off the power.
fig.SplitPoint-3-e.eps_77
fig.Panel-Split-4.eps
1.
Hold down the [Split] button and press a key set as the split point.
The key you pressed becomes the split point, and appears in the display.
fig.d-spltpoint.eps
The key being used as the split point belongs to the left-hand section of the keyboard.
The display will return to its previous state when you release the [Split] button.
The name of the lower tone is displayed while you hold down the [Split] button.
Changing the Keyboard’s Split Point
Split Point (Power-up default: F 3)
Range in which you can specify the split point (B1–B6)
C1 B1 B6A0 C2 C3 C4 C5 C6 C7 C8
FP-7-e.book 46 ページ ２００６年１２月１４日 木曜日 午前１０時５７分

Roland FP-7 Specifications

General

Amplifier	13 W x 2
Keyboard	88 keys (PHA II keyboard with Escapement)
Touch Sensitivity	5 types, fixed touch
Sound Generator	128-note polyphony
Effects	Reverb, Chorus
Speakers	12 cm x 2
Connectivity	MIDI (In, Out), USB, Headphones, Line Out, Pedal
Recorder	3-track recorder
Display	128 x 64 dots
Included Accessories	Owner's Manual, Music Rest
Internal Memory	External storage: USB memory