Roland FP-7 User Manual

55
Performing
1.
Press the [Display] button several times so it’s lit in orange.
The tempo is displayed.
fig.d-Tempo.eps
2.
Press the [-] or [+] button to adjust the tempo.
The tempo is set in terms of the value of a quarter note, with possible values ranging from 10 up
to 500.
The volume of the metronome can be adjusted, with ten volume levels available.
This is set to “5” when the instrument is turned on.
1.
While holding down the [Metronome] button, press the [-] or [+] button to
adjust the volume.
The display will indicate the metronome volume.
fig.d-MetroVol.eps
When the metronome volume is set to “0,” the metronome sound does not play.
You can also adjust the volume of the metronome by turning the [Balance] knob while
you hold down the [Metronome] button.
Changing the Tempo
Changing the Volume of the Metronome
NOTE
FP-7-e.book 55 ページ ２００６年１２月１４日 木曜日 午前１０時５７分

Roland FP-7 Specifications

General

Amplifier	13 W x 2
Keyboard	88 keys (PHA II keyboard with Escapement)
Touch Sensitivity	5 types, fixed touch
Sound Generator	128-note polyphony
Effects	Reverb, Chorus
Speakers	12 cm x 2
Connectivity	MIDI (In, Out), USB, Headphones, Line Out, Pedal
Recorder	3-track recorder
Display	128 x 64 dots
Included Accessories	Owner's Manual, Music Rest
Internal Memory	External storage: USB memory