Roland FP-7 User Manual

152
Connecting to MIDI Devices
4.
Press the [-] or [+] button to change the
settings.
5.
Press the [Display] button.
Setting the Transmit Channel
Here’s how to specify the channel on which a PC (program
change) message will be transmitted to an external MIDI
device when you switch registrations on the FP-7.
6. While holding down the [Display] button, use
the [-] [+] buttons to select “Tx Channel.”
7.
Press the [-] or [+] button to select the
transmission channel.
If you choose the “Off” setting, program change will
not be transmitted.
8.
Save the setting in the registration (p. 80).
Item
Description
Bank Select MSB
Specifies the Bank Select MSB that will
be transmitted.
Bank Select LSB
Specifies the Bank Select LSB that will
be transmitted.
Program Change
Specifies the Program Change
number that will be transmitted.
Item
Setting
Bank Select MSB
0 (00h)–127 (7Fh)
Bank Select LSB
0 (00h)–127 (7Fh)
Program Change
1 (00h)–128 (7Fh)
Setting (Channel)
Off, 1–16
NOTE
FP-7-e.book 152 ページ ２００６年１２月１４日 木曜日 午前１０時５７分

Roland FP-7 Specifications

General

Amplifier	13 W x 2
Keyboard	88 keys (PHA II keyboard with Escapement)
Touch Sensitivity	5 types, fixed touch
Sound Generator	128-note polyphony
Effects	Reverb, Chorus
Speakers	12 cm x 2
Connectivity	MIDI (In, Out), USB, Headphones, Line Out, Pedal
Recorder	3-track recorder
Display	128 x 64 dots
Included Accessories	Owner's Manual, Music Rest
Internal Memory	External storage: USB memory