Roland FP-7 - Creating a Piano Sound to Your Taste (Piano Designer)

63
Performing
The FP-7 lets you create your own piano sound by adjusting settings such as the sympathetic
resonance of the piano strings. This function is called “Piano Designer.”
When you’ve created a sound you like, you can also save it.
When the [Registration] button is lit, Tone buttons ([1]–[7]) can be pressed to select registrations.
If you want to select a tone, press the [Registration] button to turn off its light.
1.
Press the [Display] button so its illumination is turned off.
The name of the currently selected tone is shown in the screen.
2.
Select the “Grand Piano 1” sound.
Press the [Piano] button to select the Piano Tone Group.
Press the [-] button several times to select “Grand Piano 1.”
3.
Hold down the [Display] button and press the [+] button.
The Piano Designer screen will appear.
There are four Piano Designer screens. To switch between the Piano Designer screens, hold down
the [Display] button and use the [-] [+] buttons.
4.
Hold down the [Display] button and use the [-] [+] buttons to select the item
that you want to adjust.
Creating a Piano Sound to Your Taste (Piano Designer)
FP-7-e.book 63 ページ ２００６年１２月１４日 木曜日 午前１０時５７分