123
Various Settings
If you’ve connected an external device to the Input jacks and
want to listen to the sound from it, the sound from the external
device may not be loud enough even if you’ve turned the FP-
7’s volume knob to the maximum position. In such cases, you
can adjust the master gain setting as follows.
Adjusting the master gain will also affect the volume of the
internal speakers and headphones.
The sound may distort if you increase the volume
excessively.
1.
Press the [Function] button.
2.
Press the [Reverb] button.
The System screen appears.
3.
While holding down the [Display] button, use
the [-] [+] buttons to select “Master Gain.”
4.
Use the [-] [+] buttons to change the setting.
You can make fine, detailed changes to the equalizer settings.
Before you make detailed adjustments to the equalizer
settings, select the equalizer type that you want to edit (p. 58).
1.
Press the [Function] button.
2.
Press the [Equalizer] button.
The Equalizer screen will appear.
There are three Equalizer screens.
3.
While holding down the [Display] button, use
the [-] [+] buttons to select the item you want to
edit.
4.
Use the [-] [+] buttons to change the setting.
The FP-7 remembers the settings even while its power
is turned off.
Adjusting the Volume (Master Gain)
Setting
-10 dB–0 dB–10 dB
NOTE
Equalizer Settings
Changing the Equalizer Settings
FP-7-e.book 123 ページ ２００６年１２月１４日 木曜日 午前１０時５７分
To Next Page
Loading...
Need help?
General
