94
Recording
Stopping Recording
5.
Press the [Play] button.
Recording will stop.
When you stop recording, the “Song” indication in the song select screen will change to
“Modified.”
The “Modified” indication shows that there is already a previously recorded performance.
Listening to the Recorded Performance
6.
Press the [Play] button.
The recorded performance will play back.
7.
Press the [Play] button once again to stop playback.
The recorded performance will disappear when you turn off the power. If you want to
keep the performance you recorded, you must save it in internal memory or on USB
memory. Refer to “Saving the Songs You Record” (p. 105).
NOTE
You can change the tone used in recording.
→ “Performing with a Variety of Sounds” (p. 35)
You can change the tempo and set the beat for the song.
➝ “Changing the Tempo” (p. 55)
➝ “Changing the Beat of Metronome” (p. 134)
You can use the FP-7’s metronome function.
In this case, the metronome sound is not recorded.
➝ “Performing with the Metronome” (p. 54)
Track Button Assignments for the Recorded Performance
When you record only a keyboard performance, the performance will be assigned to the
track buttons as follows.
Normal performance (playing a single
sound from the entire keyboard)
The performance is recorded to the Track [2] button.
Dual performance (p. 41) The performance is recorded to the Track [2] button.
Split performance (p. 43)
The Lower Tone is recorded to the Track [1] button,
and the Upper Tone to the Track [2] button.
FP-7-e.book 94 ページ ２００６年１２月１４日 木曜日 午前１０時５７分
To Next Page
Loading...
Need help?
General
