Roland FP-7 - Recording Your Performance with Session Partner

98
Recording
You can easily record session performances to the session partner.
fig.Panel-RecSession.eps
The Session Partner performance can be recorded only to the Track [R] button.
Performance Settings
1.
Select the Tone to be played (p. 35).
2.
Make the desired settings for Session Partner (p. 66).
Settings for Recording
If there is already a recorded song, delete the recorded song before you proceed (p. 103).
3.
Select the “New Song.”
Press the [Display] button several times so it’s lit in green to display the Song Select screen.
Press the [-] button several times to select “New Song.”
fig.d-USr.eps
4.
Press the [Rec] button.
The [Rec] button will light, the [Play] button will blink, and the instrument will enter recording
standby mode.
If you decide not to record, press the [Rec] button once again.
Recording Your Performance with Session Partner
FP-7-e.book 98 ページ ２００６年１２月１４日 木曜日 午前１０時５７分