80
Saving Your Favorite Performance Settings
You can use the [Registration] button to store the currently selected buttons and Session
Partner settings. You can also use the [Registration] button and [1]–[7] buttons to recall
the settings you’ve stored. If you have certain combinations of Session Partner settings
and tones that you use frequently, you will find it convenient to save them as registrations.
The FP-7 lets you store twenty-eight different sets of performance settings.
The recommended settings were stored in the FP-7 when it shipped from the factory.
Registration from 7-1 to 7-4 include the “Basic Registration.” Use this when creating
registration from scratch.
For details on the settings that are saved as a registration, refer to “Settings Stored in a
Registration” (p. 176).
fig.Panel-RegistSave.eps
Specifying the Storage Destination for the Registration
1.
Make the desired Session Partner settings and tone settings.
2.
Hold down the [Registration] button and press one of the [1]–[7] buttons,
then press the [-] [+] buttons to which you want to assign the settings.
A screen like the following will appear when you take your finger off the [Registration] button.
fig.d-Regist.eps
While this screen is displayed, you can hold down the [Display] button and press the
[-] button to select the write-destination registration number. At this time you can also
use the [-] [+] buttons to change the write-destination number.
Storing Your Performance Settings (Registration)
FP-7-e.book 80 ページ ２００６年１２月１４日 木曜日 午前１０時５７分
To Next Page
Loading...
Need help?
General
