81
Saving Your Favorite Performance Settings
Changing the Name of a Registration
3.
Hold down the [Display] button and use the [-] [+] buttons to select the
character that you want to change.
4.
Use the [-] [+] buttons to select the desired character.
If you decide not to write the registration, press any of the [1]–[7] buttons.
Storing the Registration
5.
Press the [Registration] button.
Your performance settings will be saved.
The [Registration] button will change from blinking to lit.
Never turn off the power while settings are being saved. If you do so, the FP-7’s
internal memory will be destroyed, rendering it unusable.
You can return the content saved at a [Registration] button to the factory-set condition.
Refer to “Restoring the Factory-set Condition (Factory Reset)” (p. 135).
To select the performance settings you saved, refer to “Recalling a Registration” (p. 82).
NOTE
FP-7-e.book 81 ページ ２００６年１２月１４日 木曜日 午前１０時５７分
To Next Page
Loading...
