114
Saving a Performance
7.
While holding down the [Display] button, use the [-] [+] buttons to select
“Type.”
8.
Use the [-] [+] buttons to select the direction of the copy operation.
Choose “Ext -> Int.”
9.
While holding down the [Display] button, use the [-] [+] buttons to select
“Ext” (USB memory).
The number and name of the song to be saved will appear.
10.
Use the [-] [+] buttons to select the song(s) that you want to copy.
If you select “All,” all songs will be copied.
11.
While holding down the [Display] button, use the [-] [+] buttons to select
“Int” (internal memory).
The screen will show the save-destination song number and song name.
If you select a number in which a song has already been saved, the song that was previously
saved at the copy destination will be erased. If you don’t want to erase a previously saved song,
select a number for which the display indicates “(Not Used).”
12.
Use the [-] [+] buttons to select the copy destination.
Copying the Song(s)
13.
Press the [Rec] button.
The selected song(s) will be copied to internal memory.
Never turn off the power while data is being copied.
You can save up to 99 songs in internal memory. However, if there is insufficient
capacity remaining, the indication “Error: 11” will appear (p. 157), and you won’t be
able to save the song even though there are fewer than 99.
You can erase all of the content saved in internal memory and restore it to the factory-
set condition. Refer to “Initializing Internal Memory” (p. 132)
You can’t copy a Wav file into internal memory.
NOTE
NOTE
NOTE
FP-7-e.book 114 ページ ２００６年１２月１４日 木曜日 午前１０時５７分
To Next Page
Loading...
Need help?
General
