84
Saving Your Favorite Performance Settings
6.
Use the [-] [+] buttons to select the desired character.
Selecting the Save Destination for Registration Sets
7.
While holding down the [Display] button, use the [-] [+] buttons to select
“Media.”
8.
Use the [-] [+] buttons to select the save-destination media.
9.
While holding down the [Display] button, use the [-] [+] buttons to select
“Destination.”
fig.d-001+.eps
10.
Use the [-] [+] buttons to select the save destination.
If a registration set name is displayed for a number, a registration set has already been saved at
that number.
If you select a number in which a registration set has already been saved, and save to that number,
the previously saved registration set will be deleted. If you don’t want to delete a previously saved
registration set, select a number for which the save-destination field indicates “(Not Used).”
Saving the Registration Set
11.
Press the [Rec] button.
The registration set will be saved.
Never turn off the power while settings are being saved. If you do so, the FP-7’s
internal memory will be destroyed, rendering it unusable.
You can return the content saved at a [Registration] button to the factory-set condition.
Refer to “Restoring the Factory-set Condition (Factory Reset)” (p. 135).
To recall the saved registration set, refer to “Loading a Registration Set You Saved” (p.
85).
Setting
Description
Internal
Internal Memory
External
USB Memory
NOTE
FP-7-e.book 84 ページ ２００６年１２月１４日 木曜日 午前１０時５７分
To Next Page
Loading...
