Roland Jupiter-80 - Basic Operation; Moving the Cursor

24
Basic Operation
This section explains the basic button and knob operations used to operate the JUPITER-80.
Moving the Cursor
A single screen or window will contain multiple items (parameters) to edit or select. To edit a parameter’s setting, you must rst move the cursor to
that parameter’s value.
The value of the selected parameter is highlighted in blue, and the knob or slider is indicated by a green frame.
Touch panel
To move the cursor, simply touch a parameter value, knob, or slider.
Cursor
(highlighted blue)
Cursor
(green frame)
Cursor buttons
You can move the cursor by pressing the [ ] [ ] [ ] [ ] (cursor) buttons.
If you hold down a cursor button, the cursor will continue moving.
If you hold down the cursor button for the desired direction, and then press the opposite cursor button, the cursor will move more quickly.