Roland Jupiter-80 - Looping a Specific Region of Time; Playing Audio Files Consecutively (Chain Play)

Using the USB Memory Song Player/Recorder
74
Looping a Specic Region of Time
You can specify start and end points within an audio le, and make
the playback loop between those points.
1. In the Song screen (p. 34), touch <Loop Switch>.
Loop playback will turn on (the button will light).
2. Use either of the following methods to specify the start
and end points for loop playback.
• Use Loop Top Point to specify the start, and Loop End Point to
specify the end.
The value is specied in terms of (hours) : (minutes) : (seconds) .
(1/100th second).
• Carry out playback until you reach the desired loop start or end
point, and then touch <SET LOOP TOP> (start) or <SET LOOP
END> (end).
MEMO
When using loop playback with an MP3 le, the time you
specied might shift somewhat forward or backward (loop
playback will occur near the time you specied).
3. Press the [ ] (PLAY) button.
Playback will loop between the Loop Top Point (start) and Loop End
Point (end).
4. To turn o loop playback, touch <Loop Switch> once
again.
Loop playback will turn o (the button will go out).
MEMO
You can’t play back a loop of a specied time if chain play is on.
Playing Audio Files Consecutively (Chain
Play)
Here’s how the audio les in the same folder can be played
consecutively.
1. In the Song screen (p. 34), touch <Chain Play>.
Chain play will turn on (the button will light).
2. Press the [
] (PLAY) button.
The audio les will begin playing. When a song ends, playback will
continue with the next song.
MEMO
• Audio les will be played in the order in which they appear in
the audio le list.
The “N
” symbol indicates the song that will be played next.
• During playback, you can change the song that will be played
next simply by touching another audio le (the “N
” symbol will
move).
<Chain Play>
Currently selected
audio le
Audio le that will
be played next
3. To turn chain play o, touch <Chain Play> once again.
Chain play will turn o (the button will go out).
MEMO
• Chain play will automatically turn o if you press the [
] (STOP)
button.
• If chain play is on, turning <Loop Switch> on will make the
audio les in the folder play repeatedly. When the last audio le
in the folder has nished playing, playback will return to the rst
le and continue.