Roland Metaza MPX-90 - When Moving the Machine; Attach the Retaining Materials to the Machine

111
Chapter 6 Appendix
6-2 When Moving the Machine
Attach the retaining materials to the machine.
When moving the machine, be sure to attach the retaining materials. Moving the machine without attaching
the retaining materials may result in damage to the machine.
Procedure

Switching on the power.
 P. 30, "Switching On the Power"

Detach the table (or the center
vise).

Attach a head cap to the tip of
head.

Switching off the power.
 P. 31, "Switching Off the Power"
Head cap
Head
Hold the head.