Roland Metaza MPX-90 - Step2: Make Horizontal Writing on Portrait Material

80
4-5 Printing on a Curved Surface
Chapter 4 More Advanced Operations
Step2 : Make horizontal writing on portrait material.
After the printing area is determined, place images and text on the area.
This section explains the method of inputting characters horizontally on portrait material.
Procedure

Type in the text to print, then
adjust how it’s laid out.
 P. 50, “Step3 : Enter the Text”
Change the text size to any size
of your preference.
It must be t within the printing area.
 P. 64, “Adjusting the Location, Size, or
Angle of a Text”

Rotate the input character to make
it vertical.
 P. 64, “Adjusting the Location, Size, or
Angle of a Text”